Pool Control for Hayward/Goldline

From Autelis
Jump to navigationJump to search

Welcome to the Product Page for Pool Control for Hayward/Goldline

About this product

Pool Control for Hayward/Goldline is designed to link your Hayward/Goldline Aqua Logic or Pro Logic powered pool to your network and provide a remote control interface over the web and through various dedicated apps and/or home automation systems.

Return to the Product Page

Disclaimer: All trademarks referenced herein are the property of their respective owners. This product is not affiliated with or endorsed by Hayward Industries, Inc. or its affiliates in any way.



Please choose the right firmware for your device model.

Pool Control (PC100HG)

Current software version: 1.0.11 Download

Feature Specific Firmwares

PC100HG Universal Devices ISY 2-Way Integration

PC100HG TCP Serial Port Firmware

Firmware updates should only be applied over a local network connection.

Note: Firmware updates require the Java runtime available here: http://www.java.com/en/download


Installation Notes

This version of Autelis Pool Control is compatible with Hayward/Goldline Aqua Logic, Aqua Plus and Pro Logic systems. If you require compatibility other systems please see our other Pool Control products or contact us for more information.

This product is designed for indoor installation and the enclosure supplied is not waterproof.

If your system wiring is vulnerable to power surges caused by lightning strikes then installing a lightning isolation device is recommended. Damage due to lightning surges is not covered under the product warranty.

Connection to System

Autelis Pool Control interfaces directly to your existing system and does not require any additional interface or protocol adapters. Installation requires connection to the 4-wire equipment bus on your system. This 4-wire bus connects all the keypads and control devices in your system to the main control center. You can connect to the bus either at the control center or at a keypad location. Please refer to the installation manual for your system for more information on connecting keypads and accessory equipment to the bus and be sure to follow all safety procedures described therein. Once you have familiarized yourself with the hardware and turned off the power to the system, follow the diagram on the label on your device to match the labels on the 4-wire connector with the correct bus wires which are designated by color (Green, Yellow, Black, Red).

Connection to Network

Installation requires connection to your network router or switch which supports 10Base-T Ethernet. Connect the built-in ethernet port to your network device using the included cat-5 cable or a standard cat-5 networking cable of your choice. You may also use a wireless bridge or a Powerline network device to provide the network connection. The Pool Control device will obtain an IP address automatically via DHCP.

Connection to Power

No external power adapters are required as the device gets power from the pool panel. When powered on, the green LED on the ethernet port will blink for 5 seconds and then the device will boot normally.

Web Interface

To access the web interface type 'http://poolcontrol' into your browser. This may not work with all routers and network configurations (see below hint). You can also type the IP address of the Pool Control device which can be found in your router interface by matching an IP address from the table with the MAC address printed on the bottom of the device or by using an IP scanner tool to search by MAC address. Log in using the username 'admin' and the default password 'admin'.

Windows Hint: In your network connection properties under TCP/IPv4 properties, click the advanced button. In the DNS tab, select "Append these DNS suffixes (in order)" and click add and enter "." (a single period with no quotes).

System Information

This page displays basic system information.

Operating Mode
The operating mode of the connected system. This can be "Auto", "Service", or "Off".
Software Version
The software version of the Autelis Pool Control device. This information is not related to the Hayward/Goldline software version.
System Status
If there are any system errors they will be indicated here.
The current time value from the Autelis Pool Control device, adjusted for your computer's local time settings. This information is not related to the time kept by the Hayward/Goldline system.
Clicking this button will reboot the Autelis Pool Control device. It will not reboot the Hayward/Goldline system.
Clicking this button will reset all settings to factory defaults (including password) and reboot the device. It will not change any settings on or reboot the Hayward/Goldline system.

Equipment Control

This page displays the current status and on, off controls for equipment.

Temperature Control

This page displays temperature information, and on and off controls for heating equipment.

You must use the keypad page to change setpoints and other heat settings.


This page allows you to change the admin password and set the names for the equipment attached to any auxiliary relays or dimmers. You must also select your system model.

All fields are limited to 15 characters or less.

Advanced Settings

This hidden page allows you to change some advanced settings. To access it visit http://poolcontrol/advanced.htm

This is the value that will be sent to your E-Mail SMTP server to identify the connection. You should not need to change this setting under normal circumstances.
IP Address
If you need to define a static IP address for Pool Control, you may do so here. Warning: If you set a static IP address the only way to reactivate DHCP is through this webpage so do not forget the IP address. Set to to use DHCP to automatically obtain an IP.
This value defines the port on which the web server operates. Warning: If you change the port the only way to reset it to default is through this webpage so do not forget the port. Set to 0 or 80 to use the default port. Note: If you use a port other than 80 (for example, 88) you will have to type http://poolcontrol:88 in your browser.


This page allows you to configure the alert settings including your email server, Twitter account, and which alerts you wish to receive via one or both methods.

Please see: EMail Settings

Additionally, you can create a new Twitter account for your pool and follow it with your own account. It is also a great way to keep a log of past alerts.

The first column of checkboxes is to select which events will cause an email alert to be sent. The second column of checkboxes is to select which events will cause a Twitter alert to be sent.

Equipment alerts will be sent on any change of state. For temperature alerts, a threshold temperature must be defined. Alerts will only be triggered by crossing the threshold in one direction. For a low temperature threshold, an alert will be sent when the temperature reaches the threshold due to a decrease in temperature. For a high temperature threshold, an alert will be sent when the temperature reaches the threshold due to an increase in temperature.


This page allows you to set various reminders to help keep track of pool maintenance tasks.

The date the reminder was last reset is shown along with a timer which varies from 1-60 days.

Tasks that are past due are shown in red while tasks that are current are shown in green and inactive tasks are gray.

Reminder alerts are configured on the alerts page and once a reminder alert has been sent no additional alerts will be sent until the reminder is manually reset.


The keypad can be controlled using your mouse to click the buttons on the screen or by using your keyboard. The available actions and their associated keyboard keys are listed below.

Menu - Enter
Left - Left Arrow
Right - Right Arrow
Up - Up Arrow
Down - Down Arrow

Mobile Web App

The device contains a built-in mobile web app which can be accessed from any browser including iPhone, iPad, and Android devices. You can also save the web app to your home screen for convenience.

To launch the web app, visit http://poolcontrol/app.html or http://ip.address.here/app.html

Saving Password

The app allows you to save your password so that you do not need to log in every time you visit it. This is especially useful when adding the app to your home screen on iOS devices. To save your password, load the app and click on the settings button in the top right corner. Then click "Save Password". To clear your saved password, click "Clear Password".

Activating Equipment

To turn equipment on and off, simply click on the name of the equipment. You should see the status change after a few seconds.

Emergency Factory Reset / Forgotten Password

Depress the reset button on the device for 5 seconds and release to restore the device to factory default settings.

Home Automation System Integration

Pool Control (HG) HTTP Command Reference

PC100HG Universal Devices ISY 2-Way Integration

PC100HG TCP Serial Port Firmware

More coming soon...

Compliance Information

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an output on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.