Unable to change temperature setpoint with HomeSeer

Post Reply
Will
Posts: 4
Joined: Sat Aug 12, 2017 4:51 pm

Unable to change temperature setpoint with HomeSeer

Post by Will » Sat Apr 21, 2018 9:48 am

Through my HomeSeer program and HS3 Touch app on my iPhone, in conjunction with the Autelis, I can turn on and off the Spa pump, bubbler, jets, light and heat.

I can turn on and off the Pool pump, lights, fountains and heat. I can also see the state of these various items as well as the temperature of the pool and spa.

What I can't do from the program or the app is change the temperature setpoint for the pool or spa. I have no problem controlling the temperature from the Aqualink RS6 panel inside my house. I'm using legacy software because my Jandy controller has old HH version firmware.

My question is: Should I be able to control the temperature of the spa and pool or is the inability to do so a limitation of the HH firmware and legacy software?

Thanks,

Will
autelis
Site Admin
Posts: 1123
Joined: Tue Nov 30, 2010 1:02 pm

Re: Unable to change temperature setpoint with HomeSeer

Post by autelis » Thu Apr 26, 2018 8:22 pm

That is correct, legacy firmware is unable to change the setpoint via API calls.
Autelis.com Staff
Post Reply